Walk Through Polar Bear Model (US)

*source chaîne youtube Jonathan Sechrist

cliquez ici pour accéder à leur site web: Rustic Trail Teardrop Campers

INCLUDES:

The outside is totally finished.

The inside is finished but no cabinets, bed, dinette, or mattress.

All of the things listed in the specification section below.

INCLUDES:

Everything the base model has plus.

Solid Birch plywood cabinets (no particle board here).

Elevated queen size platform bed that transitions into a 2 person dinette

with a folding mattress that makes a sofa when folded.

Lots of storage under the bed.

All the things listed in the specification section below.

2 Tone Sidewall Wrap

POLAR BEAR SPECIFICATIONS

5’ x 10’ x 6’2” Tall

Weight 1365 lbs (with the A/C unit)

Tongue Weight 130 lbs

Built on a Leonard’s metal frame (5x8)

With an easy lube torsion axle.

2 folding rear stabilizer jacks

Camper is 5’x10’(curve on front is 8” out, curve on the back is 16”out)

Sides of camper are ¾” marine grade plywood skinned with aluminum on the outside and a vinyl on the inside.

The roof is covered with a .040 aluminum.

Total height of the camper from the ground up is 99” to the top of the vent

Total length including tongue is 14”

Total width is 80” from outside of wheels

Hitch requires a 2” ball and approx 16” from ground to top of ball

Bed length is 75” width is 58 ½” floor clearance is 12”

Benches are 24” x 18 ½ each

Table is 20” x 24”

Door opening is 22” wide x 54” tall

Cabinet is Depth 17 ½ Length is 36”

Shelf height 17” depth 19” and length 22 ½” clearance from floor to bottom of shelf is 15 ½”

Upper shelf is length 58 ½” Depth 11” eight 8”

Height from mattress to ceiling at door is 53”

Height from mattress to ceiling in the back is 36”

Height from floor to ceiling at the door is 6’2”

Ceiling is 1/8” plywood with 2 x 4 cross members

Insulated with 11/2” polystyrene insulation topped with 1/8” plywood

Covered with .040 aluminum